Home > Drivers > Drivers

Overview

Event Management

Archiving

Desktop Tools

Data Management

Security

Device Drivers (OPC Servers)

Ordering Information

Downloads


Click below to begin your MatrikonOPC Driver Search.

0 item(s) in your cart.
Total: $0.00 Checkout

Gensym G2 Server for Device Communications Standards DNP3 Compatible Devices

Request a Quote

Arrange a Demo

Technical Details

Architecture Diagram

The MatrikonOPC Server for DNP 3 provides connectivity to any DNP3 compliant RTU, IED (Intelligent Electronic Device), PLC, meter, transducer, relay, etc. This server connects to multiple devices using one or more DNP3 levels at the same time. Each read/write with the devices is optimized to maximize throughput.

This server has been tested with hardware from vendors such as ABB, Control Microsystems, GE Power Systems, Schweitzer Engineering Laboratories and others.

The MatrikonOPC Server for DNP 3.0 includes support for:

DNP protocol master including level 1, level 2 and level 3 plus selected vendor extensions (strings, reporting dead band, frozen analog inputs, etc.)
Multiple communication channels at the same time:
- Serial
- Radio
- Network (Ethernet TCP/IP and UDP/IP)
- CDPD (Cellular Digital Packet Data)
- Dial-up (including dial-in and dial-out)
Optimized for low-bandwidth and noisy communication channels
Supervisory control using single-destination and broadcast commands
Redundancy:
- Channel redundancy
- Failover and Fail-back
Runs as a Windows Service
Comprehensive polling engine:
- Poll Management:
  - Round-robin polling
  - Interleaved polling
  - Demand polling
  - Report by exception
  - Configurable polling priorities (high, medium, low)
- Port configuration:
  - Multiple ports
  - Configurable baud rate for each port
  - Serial and TCP/IP
  - Same station delay
  - Direct, modem/radio, dial-up
- External configuration
  - Polling engine control
  - Online changes without data loss
  - Complete access to communication diagnostics
- Communication diagnostics
  - Status flag
  - Poll count
  - No-response count
  - Incomplete poll
  - Fail/retry count
  - All station time updates
  - Response timeout

Features and Benefits

Tag Browse Capable
Configurable Time-Out
Redundancy
Multidrop
Supports Telemetry Scada
Supports Multiple Data Sources


	MatrikonOPC Server Features, Benefits and Options:
	Flexible Client Application Connectivity Options Dedicated Device Connectivity Tag Database and Browsing Options Extensive Tag Management Options Diagnostic and Logging Options Certified Compliant and Interoperability Tested Common User Experience Configuration to Optimize for a Specific System Full Featured OPC Test Client – OPC Explorer

Details:
	The MatrikonOPC Server for DNP 3.0 includes support for: DNP protocol master including level 1, level 2 and level 3 plus selected vendor extensions (strings, reporting dead band, frozen analog inputs, etc.) Multiple communication channels at the same time: Serial Radio Network (Ethernet TCP/IP and UDP/IP) CDPD (Cellular Digital Packet Data) Dial-up (including dial-in and dial-out) Optimized for low-bandwidth and noisy communication channels Supervisory control using single-destination and broadcast commands Redundancy: Channel redundancy Failover and Fail-back Runs as a Windows Service Comprehensive polling engine: Poll Management: Round-robin polling Interleaved polling Demand polling Report by exception Configurable polling priorities (high, medium, low) Port configuration: Multiple ports Configurable baud rate for each port Serial and TCP/IP Same station delay Direct, modem/radio, dial-up External configuration Polling engine control Online changes without data loss Complete access to communication diagnostics Communication diagnostics Status flag Poll count No-response count Incomplete poll Fail/retry count All station time updates Response timeout

System Requirements:

	PC Hardware
		Pentium II 200 MHz 16 MB RAM 32 MB of hard disk space. Ethernet with TCP/IP services enabled
	Device Hardware
		Device communication requires at least one of the following: Serial communications port RS232/422/485 cabling and/or converters Radio modem Modem (dial-up, leased line, CDPD, GPRS) IP compatible network (TCP/IP and UDP/IP)

	PC Software
		Windows NT OpenVMS v6.x G2 and GSI Extensions Version 3 (The GSI Extensions should be for the hardware/software platform the bridge will reside on.) VAX VMS (or OpenVMS) G2/GSI version 3.0, on-line license option with GSI extensions for the UNIX platform where the bridge code will reside. BASEstar Open v3.0 G2 version 4.0 and GSI version 3.2, on-line license option with GSI extensions for the UNIX or NT platform where the bridge code will reside TCP/IP Support for both the G2 and CIMPLICITY nodes Serial(RS-232) connection Gensym G2 version 5.0

Gensym G2 Server for Device Communications Standards DNP3 Compatible Devices

Details:

System Requirements: