MatrikonOPC Server for Modbus

Supported Devices:

More...

Quick Links:

The MatrikonOPC Server for IOtech provides robust data exchange between OPC Clients and PointScan RTUs using the Modbus protocol.

The MatrikonOPC Server for IOtech provides uses with optimum performance thanks to its innovative multi-threaded design.

Arrange a Demo

Matrikon's OPC Server Advantage

	OPC Security
	Device Communication Redundancy
	Advanced tag pre-processing (calculation)
	Alarm and Events
	Maximum Interoperability
	"Simulation Mode"
	User Defined Tag names

MatrikonOPC's Industrial Strength Guarantee

Cables: Ethernet or RS-232

IOCard: Serial port for serial Modbus SA85 card for Modbus Plus Ethernet card

OPC Specifications

	OPC DA (OPC Data Access) 1.0
	OPC DA (OPC Data Access) 2.05a
	OPC DA (OPC Data Access) 3.0

Details:

Modbus Plant Edition provides support for:

Modbus Ethernet (TCP/IP) using the Modicon NOE module
Modbus Master
Modbus Slave configurations (Serial connections only)
Various Modbus protocols
- Bently Nevada
- Daniel Modbus
- Enron Modbus
- Modbus (using RS-232 Serial)
- Modbus Plus using an SA-85 card
- Modbus ASCII
- Modbus RTU (binary)
- ... many more
Terminal Server
Read and write access to all PLC register types
Concept style floating point analog registers
Multiple communication channels at the same time:
- Serial
- Network (Ethernet TCP/IP and UDP/IP)

Modbus SCADA Edition provides support for:

Modbus Master mode
Modbus Slave mode
Modbus RTU, Modbus ASCII, and Modbus TCP protocols
Multiple communication channels at the same time:
- Direct Serial (RS-232/422/485)
- Radio
- Network (Ethernet TCP/IP and UDP/IP)
- Terminal servers (TCP/IP and UDP/IP)
- CDPD (Cellular Digital Packet Data)
- Dial-up (including dial-in and dial-out)
Multiple Modbus register support:
- Read Modbus Filetype registers 0,1,3,4
- 32-bit register support via 3W and 4W Filetypes (Enron/Daniels)
- Single-precision IEEE floating-point analog registers
Optimized for low-bandwidth and noisy communication channels
Supervisory control using single-destination and broadcast commands
Redundancy:
- Channel redundancy
- Fail-over and Fail-back
Comprehensive polling engine:
- Round-robin polling
- Interleaved polling
- Demand polling
- Configurable polling priorities
Port configuration:
- Multiple ports
- Configurable baud rate for each port
- Serial and TCP/IP
- Same station delay
- Direct, modem/radio, dial-up
External configuration
- Polling engine control
- Online changes without data loss
- Complete access to communication diagnostics
OPC Server statistical tags:
- Status flag
- Poll count
- No-response count
- Incomplete poll
- Fail/retry count
- All station time updates
- Response timeout
- Number of OPC Clients connected
- OPC Server status
Supports bitmask read and write

System Requirements:

	PC Hardware
		The following PC Hardware is required: Intel® Pentium® 4 Processor 512 MB RAM Minimum 32 MB of available hard disk space CD-ROM driver Super VGA (800 × 600) or higher-resolution monitor with 256 colors
	Device Hardware
		Modbus - RS232 Cable - Available serial port Modbus Ethernet - Ethernet Card - Ethernet network with TCP/IP services enabled Modbus Plus - Modicon SA-85 card - Netlib drivers PLC Hardware - If using Modicon PLC with Modbus Ethernet then must also use the NOE module

	PC Software
		The following Windows Operating Systems will support this OPC Server: Windows 2000 Windows XP Windows 2003