|
|
| |
| |
The MatrikonOPC Server for DNP 3 provides connectivity to any DNP3 compliant RTU, IED (Intelligent Electronic Device), PLC, meter, transducer, relay, etc. This server connects to multiple devices using one or more DNP3 levels at the same time. Each read/write with the devices is optimized to maximize throughput.
This server has been tested with hardware from vendors such as ABB, Control Microsystems, GE Power Systems, Schweitzer Engineering Laboratories and others. 
|
|
| |
|
|
 |
The OPC Server for Device Communications Standards DNP3 is OPC Certified!
OPC Certification is the process of ensuring that applications meet the standards specified by the OPC Foundation. OPC Certification requires extensive testing to ensure true interoperability. OPC Certification means multi-vendor system interoperability is guaranteed. If your OPC products are not certified, you need to ask your vendor what sort of guarantees they offer. |
|
| |
OPC Specifications
| |  OPC DA (OPC Data Access) 1.0a | | | OPC DA (OPC Data Access) 2.0 | | | OPC DA (OPC Data Access) 2.05a | | | OPC DA (OPC Data Access) 3.0 |
|
Details:
| | |
The MatrikonOPC Server for DNP 3.0 includes support for:
- DNP protocol master including level 1, level 2 and level 3 plus selected vendor extensions (strings, reporting dead band, frozen analog inputs, etc.)
- Multiple communication channels at the same time:
- Optimized for low-bandwidth and noisy communication channels
- Supervisory control using single-destination and broadcast commands
- Redundancy:
- Channel redundancy
- Failover and Fail-back
- Runs as a Windows Service
- Comprehensive polling engine:
- Poll Management:
- Round-robin polling
- Interleaved polling
- Demand polling
- Report by exception
- Configurable polling priorities (high, medium, low)
- Port configuration:
- Multiple ports
- Configurable baud rate for each port
- Serial and TCP/IP
- Same station delay
- Direct, modem/radio, dial-up
- External configuration
- Polling engine control
- Online changes without data loss
- Complete access to communication diagnostics
- Communication diagnostics
- Status flag
- Poll count
- No-response count
- Incomplete poll
- Fail/retry count
- All station time updates
- Response timeout
|
System Requirements:
| | PC Hardware | | | | The following PC Hardware is required:
Intel® Pentium® 4 Processor
512 MB RAM
Minimum 32 MB of available hard disk space
CD-ROM driver
Super VGA (800 × 600) or higher-resolution monitor with 256 colors
Mouse pointing device | | | Device Hardware | | | | Device communication requires at least one of the following:
- Serial communications port
- RS232/422/485 cabling and/or converters
- Radio modem
- Modem (dial-up, leased line, CDPD, GPRS)
- IP compatible network (TCP/IP and UDP/IP)
|
| | PC Software | | | | The following Windows Operating Systems will support this OPC Server:
Windows 2000
Windows XP
Windows 2003
Features Include:
Support for DDE
Aliases for tag names
Calculation engine |
|
|